Blog

DIFFERENCE BETWEEN DRY AND WET TYPE PAINT BOOTHS

What is the difference between a wet and dry paint booth? A dry booth typically consists of paint arresting filters to trap the over spray paint or excess paint fumes. A wet type  paint booth consists of a water curtain or water to trap the excess paint over spray which mixes and forms a sludge … Continue reading Difference between Dry and Wet type Paint booths

Read More

WHAT IS A SIDE DRAFT PAINT BOOTH?

Side draft paint booth is when the air flow is towards the water curtain or the paint arresting filter from the side. Generally making a civil pit will not be necessary in a side draft paint booth making it affordable and inexpensive. When can you use a side draft paint booth? Side draft paint booth … Continue reading What is a Side Draft Paint booth?

Read More

HOW TO SHOT BLAST LARGE COMPONENTS WITHOUT USING LADDER?

Shot blasting large components can always be a challenge especially when it cannot be reached by the operator.Manual ladders can be difficult to climb and exhausting for the operator.Also there is a risk of few critical areas which cannot be accessed due to its size and this results in improper blasting. Instead we offer you … Continue reading How to Shot Blast Large Components without using Ladder?

Read More

PRISM BAGS BASF GERMANY GLOBAL CONTRACT FOR PAINT BOOTHS

Prism surface coatings Bangalore has bagged a global contract from BASF Germany to supply all of its paint spray booths worldwide. This is an exclusive contract between Prism India and BASF Germany. Prism will be supplying paint booths across Europe, Thailand, japan , China , India etc. Prism is a global manufacturer and supplier of … Continue reading Prism Bags BASF Germany Global Contract for Paint Booths

Read More

PRISM BAGS LARGEST POWDER COATING PLANT ORDER IN INDIA

Prism surface coatings has bagged one of India’s largest powder coating plant / line order from Spectrum Technologies.The plant is coming up in Jalgaon, Maharashtra. Prism surface coatings is one of the largest suppliers in the world supplying powder coating plants and Paint shops with over 700 installations worldwide. Prism has installed numerous powder coating … Continue reading Prism Bags Largest Powder Coating Plant Order in India

Read More

PRISM ACQUIRES OMT SURFACE TEKNIK GERMANY

In 2014 Prism has acquired OMT Germany who was one of the world leaders from Europe in supplying Powder coating lines and Painting lines. OMT Germany is based in Stuttgart which is the birth place of many German automotive companies. What does this mean to the customer? With this acquisition Prism will be able to … Continue reading Prism Acquires OMT Surface Teknik Germany

Read More

PRISM BAGS LARGEST AIRCRAFT HANGAR PAINT BOOTH IN UAE

Prism surface coatings has bagged UAE largest Paint booth and could possibly be the largest paint booth for military aircraft in the middle east. Prism surface coatings is a turnkey supplier and manufacturer of complete  paint booth for aerospace and aircraft hangars.    

Read More

WHEN SHOULD YOU USE A PAINT BOOTH WITH BAKING/DRYING SYSTEM

Large sized components which are heavy or difficult to move or requires complex material handling systems to  transport from one chamber to another can benefit with a paint booth and drying system in the same chamber. This speeds up the drying and painting process. It consists of paint and bake modes which can go up-to … Continue reading When Should You Use A Paint Booth With Baking/Drying System

Read More

SYMPTOMS OF A BAD PAINT/POWDER DRYING OVEN

How to know if your paint or powder curing oven is giving you issues? The paint curing oven is one of the most important part of your painting line and a bad curing oven can lead to a lot of risk and decreased productivity. Your curing oven should be able to satisfy all cure  parameters … Continue reading Symptoms Of A Bad Paint/Powder Drying Oven

Read More

THINGS TO CONSIDER IN AN EXTRUSION POWDER COATING LINE

Installing a horizontal automatic powder coating plant/line can have its own set of challenges from an extruder point of view. As you know such investments should give your company a quick ROI and at the same time enhance your brand image. The plant should perform consistently satisfying all your demanding customers at-least for the next … Continue reading Things to Consider In An Extrusion Powder Coating Line

Read More

MAIL YOURSELF

Get an instant introductory mail of Prism Group into your inbox

Mail Yourself
Categories
Latest Posts
Most Viewed Posts
Tags